Effects of asymmetric flow within vaneless diffuser on the performance characteristics of the compressor stage of a turbocharger
AbstractModern engines use turbocharger that provides the extra boost to the engines and hence helps in downsizing. Turbochargers comprise of the turbine stage, bearing housing and the compressor stage. Compressor Stage helps in providing compressed air to the engine resulting in possibility of increasing the fuel-to-air ratio, which may provide extra power to the engine. Diffuser is one of the major components within the compressor stage, which helps in increasing the pressure and hence the density of incoming air. The shape of the diffuser has a significant effect on the performance characteristics of the compressor stage. According to the studies found in the literatures, it has been found that the variations in velocity profiles within the diffusers have impact on total-to-total compressor stage performance. Therefore, it is essential to critically evaluate the effect of diffuser shape on the velocity profiles across the diffuser passage. Published literature is severely limited in establishing the effects of the velocity profile asymmetry across the diffuser on the performance characteristics of the compressor stage. Hence, the present study focuses on using a well-validated Computational Fluid Dynamics tool to numerically simulate the flow within the diffuser of various shapes quantified in form of an asymmetric effect on the performance of the compressor stage. Both straight wall diffuser and diverged wall straight diffuser have been investigated in the present study. A full factorial based DoE have been incorporated whereby two factors (L/Lmax and b2/b1) have been selected respectively. Variations in flow related parameters within the diffuser have been discussed in detail for a wide range of geometrical parameters associated with the diffuser shape. It has been found in the analysis of this paper that flow across diffuser is highly asymmetric. Therefore, asymmetry of velocity profiles values has been used to predict the performance of the compressor stage as a function of radial and circumferential velocities across the diffuser. Furthermore, a novel semi-empirical prediction model has been developed to predict diffuser performance as a function of geometric and flow variables of the diffuser. The resulting diffuser map can be used for inverse design of diffuser for compressor stage as well.
Japikse, D. and Goebel, J. (1979). Turbocharger compressor performance evaluation and critical flow field measurements. SAE Transactions. 1084 – 1103.
Adachi, Y. Otsuki, A. Bantle, K. and Miyake, Y. (1992). Performance Improvement of a Vaneless Diffuser of Centrifugal Compressor. International Refrigeration and Air Conditioning Conference. 93 – 102.
Lee, Y.T. and Bein, T.W. (2002). Centrifugal compressor with vaneless diffuser. US Patent 6,382,912.
Turunen-Saaresti, T. Reunanen, A. and Larjola, J. (2006). Computational and experimental study of pinch on the performance of a vaneless diffuser in a centrifugal compressor. Journal of Thermal Science. Volume: 15. 306 – 313.
Jaatinen, A. Grönman, A. Turunen-Saaresti, T. and Röyttä, P. (2011). Effect of vaneless diffuser width on the overall performance of a centrifugal compressor. Proc. of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. Volume: 225. 665 – 673.
Mohtar, H. Chesse, P. and Chalet, D. (2011). Effect of a map width enhancement system on turbocharger centrifugal compressor performance and surge margin, Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. Volume: 225. 395 – 405.
Robinson, C., Casey, M., Hutchinson, B., and Steed, R., (2012), June. Impeller-diffuser interaction in centrifugal compressors, Proc. of ASME Turbo Expo: Turbine Technical Conference and Exposition, 767 – 777.
Jaatinen-Värri, A. Turunen-Saaresti, T. Röyttä, P. Grönman, A. and Backman, J. (2013). Experimental study of centrifugal compressor tip clearance and vaneless diffuser flow fields. Institution of Mechanical Engineers, Part A: Journal of Power and Energy. Volume: 227. 885 – 895.
Sheng, F. Chen, H. Zhu, X.C. and Du, Z.H. (2012). A three-dimensional compressible flow model for rotating waves in vaneless diffusers with unparallel walls. Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. Volume: 226. 2230 – 2249.
Schiff, J. (2013). A preliminary design tool for radial compressors, Masters by Research thesis, Lund University, Sweden.
Jaatinen-Värri, A. Grönman, A. Turunen-Saaresti, T. and Backman, J. (2014). Investigation of the stage performance and flow fields in a centrifugal compressor with a vaneless diffuser. International Journal of Rotating Machinery. Volume: 2014.
Achilleos, P. (2014). Design optimisation of a diffuser for a turbocharger compressor stage, Masters by Research thesis, University of Huddersfield, UK.
Shaaban, S. (2015). Design optimization of a centrifugal compressor vaneless diffuser. International Journal of Refrigeration. Volume: 60. 142 – 154.
Schobeiri, M. (2005). Turbomachinery flow physics and dynamic performance. Heidelberg, Springer.
Cox. G.D., (2007), Recent CFD techniques applied during turbomachinery design in proc. of International Aerospace CFD Conference.
Cox, G., Wu, J., and Finnigan, B., (2007), January. A study on the flow around the scallops of a mixed-flow turbine and its effect on efficiency in proc. of ASME Turbo Expo 2007: Power for Land, Sea, and Air. 1017 – 1028.
Sbardella, L. Sayma, A.I. and Imregun, M. (2000). Semi‐structured meshes for axial turbomachinery blades. International Journal for Numerical Methods in Fluids. Volume: 32. 569 – 584.
Sayma, A.I. Vahdati, M. Sbardella, L. and Imregun, M. (2000). Modeling of three-dimensional viscous compressible turbomachinery flows using unstructured hybrid grids. AIAA. Volume: 38. 945 – 954.
Asim, T. Oliveira, A. Charlton, M. and Mishra, R. (2019). Improved Design of a Multi-Stage Continuous-Resistance Trim for minimum Energy Loss in Control Valves. Energy. Volume: 174. 954 – 971.
Asim, T. Oliveira, A. Charlton, M. and Mishra, R. (2019). Effects of the Geometrical Features of Flow Paths on the Flow Capacity of a Control Valve Trim. Petroleum science and Engineering. Volume: 172. 124 – 138.
Asim, T. Algadhi, A. and Mishra, R. (2018). Effect of Capsule Shape on Hydrodynamic Characteristics and Optimal Design of Hydraulic Capsule Pipelines. Journal of Petroleum Science and Engineering. Volume: 161. 390 – 408.
Asim, T. Charlton, M. and Mishra, R. (2017). CFD based Investigations for the Design of Severe Service Control Valves used in Energy Systems. Energy Conversion and Management. Volume: 153. 288 – 303.
Asim, T. and Mishra, R. (2017). Large Eddy Simulation based Analysis of Complex Flow Structures within the Volute of a Vaneless Centrifugal Pump. Sadhana. Volume: 42. 505 – 516.
Asim, T. and Mishra, R. (2016). Optimal design of hydraulic capsule pipelines transporting spherical capsules. Canadian Journal of Chemical Engineering. Volume: 94. 966 – 979.
Asim, T. and Mishra, R. (2016). Computational Fluid Dynamics based Optimal Design of Hydraulic Capsule Pipelines Transporting Cylindrical Capsules. International Journal of Powder Technology. Volume: 295. 180 – 201.
Asim, T. Mishra, R. Abushaala, S. and Jain, A. (2016). Development of a Design Methodology for Hydraulic Pipelines Carrying Rectangular Capsules. International Journal of Pressure Vessels and Piping. Volume: 146. 111 – 128.
Jaatinen, A., (2009), Performance improvement of centrifugal compressor stage with pinched geometry or vaned diffuser, Lappeenranta University of Technology, Finland.
Schlichting, H. and Gersten, K. (2016). Boundary-layer theory. Springer.
Aungier, R.H. (2000). Centrifugal compressors: a strategy for aerodynamic design and analysis. American Society of Mechanical Engineer.